Oven interior

Before switching on again ensure that all controls are in the 

OFF position. Take out all trays and the grill out of the oven. 
Clean out the interior with a piece of moist, soapy cloth. 

Then, clean it once more with a wet piece of cloth and let 

it to dry.

Do not use dry powder agents for cleaning.

Special cleaners that are commercially available may be used 

after carefully reading the warning that are written on the 

labels.

Warning!

Never clean the inside of the oven and trays with hard brushes, 

steel pads or knives.

Special cleaners that are commercially avaible may be used 

after carefully reading the warning that are written on the 

labels.

* Catalytic-enamel led models(if available); 

The

oven interior of this model is coated with catalytic enamel 

since the catalytic enamel cleans itsellf, you do not have to 

perform an e)ctra cleaning after the cooking operation.

if your oven obtains steei rack;

To clean the steel rack, unscrew 
the 4 screws. After cleaning 

operation, assemble the steel rack 

to the oven body again.

Oven door

Wipe over the door outer panel with a cloth wrung out in hot soapy 

water, then after wiping with a

doth wrung out in dear water. Do not use scouring pads or abrasive 

powder which may scratch the surface. Take care during cleaning not to 

damage or distort the door seal.

Replacing the oven lamp 

(In models with lamp):

1.

 Unplug the power cable.

2.

  Then,  remove  theprotective  glass  cover 

of  the  lamp  inside  your  oven  by  turning  it 

counterclockwise

3.

 Then, remove the bulb by turning it 

counterclockwise.

4.

  After  installing  the  correct  bulb  obtained  from  an  Authorized  Service, 

reinstall the protective glass of the lamp.

-

iW..

^ 

ar -

24