35
D-Link DIR-640L User Manual
Section 3 - Configuration
Enable Wireless:
IP Address:
802.11 Mode:
Enable Auto
Channel Scan:
Wireless
Channel:
Transmission
Rate:
Channel Width:
Visibility Status:
Check to enable the wireless function. If you do not want
to use wireless, uncheck the box to disable all the wireless
functions.
Input the IP Address of the router. (The default is 192.169.0.1)
Select the wireless mode from the drop-down menu.
This setting can be selected to allow the DIR-640L to choose
the channel with the least amount of interference.
Indicates the channel setting for the DIR-640L. If you enable
Auto Channel Scan, this option will be greyed out.
Select the transmission rate or let the router automatically
choose for you.
Select the Channel Width:
Auto 20/40 - This is the default setting. Select if you are using
both 802.11n and non-802.11n wireless devices.
20MHz - Select if you are not using any 802.11n wireless
clients.
40MHz - Select if using only 802.11n wireless clients.
Select Invisible if you do not want the SSID of your wireless
network to be broadcasted by the DIR-640L. If Invisible is
selected, the SSID will not be seen by Site Survey utilities
so your wireless clients will have to know the SSID of the
DIR-640L.
Manual Wireless Settings
The Wireless Settings feature will allow you to create temporary zones that can be used by guests to access the Internet.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
