62
D-Link DIR-640L User Manual
Section 3 - Configuration
PPPoE
Select
PPPoE
from the drop-down menu.
Enter the PPPoE account settings supplied by your
Internet provider (ISP).
Enter your PPPoE user name.
Enter your PPPoE password and then retype the
password in the next box.
Enter the ISP Service Name (optional).
Maximum Transmission Unit - you may need to
change the MTU for optimal performance with
your specific ISP. 1492 is the default MTU.
Select either
Obtain. DNS. server. address.
automatically
or
Use.the.following.DNS.Address
.
Enter the primary and secondary DNS server
addresses.
Check to enable DHCP-PD.
Enter the LAN (local) IPv6 address for the router.
Displays the Router’s LAN Link-Local Address.
Check to enable the Autoconfiguration feature.
Select
Stateful
or
Stateless
autoconfiguration.
Enter the IPv6 address lifetime (in seconds).
My IPv6 Connection:
PPPoE:
User Name:
Password:
Service Name:
MTU:
IPv6 DNS Settings:
Primary/Secondary DNS
Address:
Enable DHCP-PD
LAN IPv6 Address:
LAN Link-Local Address:
Enable Autoconfiguration:
Autoconfiguration Type:
Router Advertisement
Lifetime:
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
