![background image](/i/dell/153273/dell-1350cnw/h/dell-1350cnw-137.png)
Dell Printer Configuration Web Tool
133
Reset Defaults
Purpose:
To initialize NVM (non-volatile memory) for system parameters. After
executing this function and rebooting the printer, all the menu parameters,
except the parameters for the network, are reset to their default values.
Values:
Non-Dell Toner
Purpose:
To use toner cartridge of another manufacturer.
NOTE:
Using non-Dell-brand toner cartridges may make some printer features
unusable, reduce print quality and decrease the reliability of your printer. Dell
recommends only new Dell-brand toner cartridges for your printer. Dell does not
provide warranty coverage for problems caused by using accessories, parts, or
components not supplied by Dell.
NOTE:
Before you use toner cartridge of another manufacturer, be sure to restart
the printer.
Adjust Altitude
Purpose:
To specify the altitude of the location where the printer is installed.
Ghost
Click
Start
to print a chart to check for ghost printing.
4Colors
Click
Start
to print bands of yellow, magenta, cyan, and black with
varying density.
Alignment
Click
Start
to print a chart, and then check for proper alignment of
the print image on the paper.
Drum Refresh
Click
Start
to print a chart to check the light fatigue of the drum
cartridge.
Reset Defaults
and restart
printer.
Click
Start
to initialize the system parameters.