148
Dell Printer Configuration Web Tool
LLTD
Purpose:
To specify the maximum number of devices.
Values:
Trap
Notification 1-
4
Trap Address
Type
Select the trap address type from the list.
Selecting
Off
clears the settings in
Trap Address
,
Port Number
, and
Notify
, and does not notify trap
occurrence. Selecting
IPv4
or
IPv6
allows you to
enter
Trap Address
.
Trap Address
Specifies the IP address and IP socket in the
following format:
• IPv4
Specifies the IP address and IP socket in the
nnn.nnn.nnn.nnn:mmmmm format. Each
section of "nnn" is a variable value between 0 and
255. Note that values 127 and 224-254 are not
valid for the first three-digits only. IP socket
mmmmm is a variable value between 0 and
65535.
• IPv6
Specifies the IP address and IP socket in the
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:mmm
mm format. Each section of "xxxx" is a
hexadecimal variable value between 0 and ffff. IP
socket mmmmm is a variable value between 0
and 65535.
Port Number
Enter the SNMP trap destination port number.
Notify
Specifies whether to notify trap occurrence.
Authenticate Error Trap
Specifies whether to notify Authenticate Error
Trap.
*
1
The default value can be changed by using Dell Printer Configuration Web Tool.
Maximum Number of Device
Sets the maximum number of device from 64 to
1024.