![background image](/i/dell/153273/dell-1350cnw/h/dell-1350cnw-205.png)
Understanding the Tool Box Menus
201
Printer Maintenance
The
Printer Maintenance
tab contains the
System Settings
,
Paper Density
,
Adjust BTR, Adjust Fuser, Color Registration Adjustment
,
Adjust Altitude
,
Reset Defaults
,
Non-Dell Toner
,
BTR Refresh Mode
,
TCP/IP Settings
, and
Network Settings
pages.
NOTE:
Values marked by an asterisk (*) are the factory default menu settings.
System Settings
Purpose:
To configure the power saving mode, time-out time, job log auto print, mm/
inch setting, operator panel language setting, default paper size setting, and
low toner alert message setting.
Values:
Sleep
*
1
5 minutes
*
Specifies the time taken by the
printer before it enters Sleep
mode after it finishes a job.
5–30 minutes
Deep Sleep
6 minutes
*
Specifies the time taken by the
printer before it enters Deep
Sleep mode after it goes into
Sleep mode.
1–6 minutes
Fault Time-Out
0: Off
Disables the fault time-out.
60 seconds*
Specifies the time taken by the
printer before it cancels jobs that
stop abnormally. The print job is
cancelled if it times out.
3–300 seconds
Job Time-Out
0: Off
Disables the job time-out.
30 seconds
*
Specifies the amount of time that
the printer waits for data to arrive
from the computer. The print job
is cancelled if it times out.
5–300 seconds