![background image](/i/dell/153273/dell-1350cnw/h/dell-1350cnw-145.png)
Dell Printer Configuration Web Tool
141
NOTE:
The settings in the Port Settings page will be valid only when the printer is
rebooted. When you change or configure the settings, click the Apply new settings
button to apply new settings.
TCP/IP
Purpose:
To configure the IP address, subnet mask, and gateway address of the printer.
Values:
Ethernet
*
1
Ethernet
Settings
Auto
Detects Ethernet transmission
rate and the duplex settings
automatically.
10Base-T
Half-Duplex
Selects 10Base-T Half-Duplex
as the default value.
10Base-T
Full-Duplex
Selects 10Base-T Full-Duplex
as the default value.
100Base-TX
Half-Duplex
Selects 100Base-TX Half-
Duplex as the default value.
100Base-TX Full-
Duplex
Selects 100Base-TX Full-
Duplex as the default value.
Current Ethernet Settings
Displays the current settings of
Ethernet.
MAC Address
Displays the MAC address of the printer.
Port Status
LPD
Specifies whether to enable LPD.
Port9100
Specifies whether to enable Port9100.
WSD
Specifies whether to enable the WSD port.
Bonjour
(mDNS)
Specifies whether to enable the Bonjour(mDNS)
feature.
E-Mail Alert
Specifies whether to enable the
E-Mail Alert
feature.
SNMP
Specifies whether to enable the SNMP.
LLTD
Specifies whether to enable LLTD.
*
1
This item is available only when the printer is connected with a wired network.