![background image](/i/dell/153273/dell-1350cnw/h/dell-1350cnw-225.png)
Understanding the Printer Menus
221
Protocol
Purpose:
To enable or disable each protocol. The change becomes effective after the
printer is turned off and then on.
Values:
IPv4
Get IP
Address
Panel
Enables the IP address entered on the operator
panel.
AutoIP*
Automatically sets the IP address.
BOOTP
Uses BOOTP to set the IP address.
RARP
Uses RARP to set the IP address.
DHCP
Uses DHCP to set the IP address.
IP Address
Manually sets the IP address allocated to the printer.
Subnet Mask
Manually sets the subnet mask.
Gateway Address
Manually sets the gateway address.
LPD
Enable*
Enables the LPD port.
Disable
Disables the LPD port.
Port9100
Enable*
Enables the Port9100 port.
Disable
Disables the Port9100 port.
WSD
Enable*
Enables the WSD port.
Disable
Disables the WSD port.
SNMP UDP
Enable*
Enables the UDP port.
Disable
Disables the UDP port.
E-Mail Alert
Enable*
Enables the E-mail Alert feature.
Disable
Disables the E-mail Alert feature.
EWS
Enable*
Enables an access to
Dell Printer Configuration
Web Tool
embedded in the printer.
Disable
Disables an access to
Dell Printer Configuration
Web Tool
embedded in the printer.
Bonjour (mDNS) Enable*
Enables the Bonjour (mDNS).
Disable
Disables the Bonjour (mDNS).