![background image](/i/dell/158125/dell-928/h/dell-928-014.png)
Discovery Mode
Set this mode to
Enabled
if you want other Bluetooth-enabled devices to be able to detect
the USB Bluetooth adapter connected to your printer.
Security
Set the security level for the printer on the Bluetooth network.
Low (default)
High
Passkey
Specify the passkey. This is the password that must be entered by any external Bluetooth-
enabled device before sending a print request, so that the printer accepts the request.
The default password is 0000.
Device Name
The name assigned to the USB Bluetooth adapter.
When printing from a Bluetooth-enabled device, you must specify either the
Device Name
or the
Device Address
.
Device Address
Address of the USB Bluetooth adapter.
When printing from a Bluetooth-enabled device, you must modify to select either the
Device Name
or the
Device Address
.
The address of a device cannot be modified.
Paper Type
Type of paper: Plain, Coated, Photo, Transparency.
See "
Printing from a Bluetooth-Enabled Device
" for more details.
Maintenance Mode
Maintenance
Menu Item
Action
Ink Levels
Displays the percentage of ink left in the cartridges.
Clean Cartridge
Cleans the cartridges and prints a test page. This operation takes a couple of minutes.
Align Cartridges
Aligns the cartridges while printing a test page. This operation takes a few minutes. It is not possible
to interrupt the operation until it completes.
Change Print
Cartridges
The printer display shows the sequence of actions to be performed to change ink cartridges.
Print Demo Page Prints a demo page so that the print quality can be checked.
Reset Defaults
Restores the factory default settings.
Loading Paper
1. Fan out the paper.
2. Insert the paper into the paper feeder, aligned on the right.