![background image](/i/gigabyte/8959/gigabyte-ga-p67a-ud3p-b3-rev-11/h/gigabyte-ga-p67a-ud3p-b3-rev-11-041.png)
- 41 -
BIOS Setup
Command Rate(CMD)
Options are: Auto (default), 1~3.
>>>>> Channel A/B Misc Timing Control
IO Latency
Options are: Auto (default), 1~31.
Round Trip Latency
Options are: Auto (default), 1~255.
Advanced Voltage Settings
CMOS Setup Utility-Copyright (C) 1984-2010 Award Software
Advanced Voltage Settings
****** Mother Board Voltage Control ******
Voltage Types
Normal
Current
-----------------------------------------------------------------------------
>>> CPU
Load-Line Calibration
[Auto]
CPU Vcore
1.250V
[Auto]
x Dynamic Vcore(DVID)
+0.000V
Auto
QPI/Vtt Voltage
1.050V
[Auto]
System Agent Voltage
0.920V
[Auto]
>>> MCH/ICH
PCH Core
1.050V
[Auto]
CPU PLL
1.800V
[Auto]
>>> DRAM
DRAM Voltage
1.500V
[Auto]
DRAM VRef.
0.750V
[Auto]
DRAM Termination
0.750V
[Auto]
Ch-A Data VRef.
0.750V
[Auto]
Ch-B Data VRef.
0.750V
[Auto]
Ch-A Address VRef.
0.750V
[Auto]
Ch-B Address VRef.
0.750V
[Auto]
higf
: Move
Enter: Select
+/-/PU/PD: Value
F10: Save
ESC: Exit
F1: General Help
F5: Previous Values
F6: Fail-Safe Defaults
F7: Optimized Defaults
Item Help
Menu Level
>>> CPU
Load-Line Calibration
Enables or disables Load-Line Calibration. Enabling this feature adjusts Vdroop, keeping the CPU
voltage more constant under light and heavy CPU load. Disabled sets the CPU voltage following Intel
specifications. (Default: Auto)
Note: Enabling Load-Line Calibration may result in damage to your CPU or reduce the useful life of the
CPU.
CPU Vcore
The default is Auto.
Dynamic Vcore(DVID)
This option is configurable only when CPU Vcore is set to Normal. The default is Auto.
QPI/Vtt Voltage
The default is Auto.
System Agent Voltage
The default is Auto.
>>> MCH/ICH
PCH Core
The default is Auto.
CPU PLL
The default is Auto.