![background image](/i/infiniti/150404/infiniti-m35-2007-m45-2007/h/infiniti-m35-2007-m45-2007-194.png)
radio reception and CD playback.
ON
z
OFF/Volume control:
Push the ignition switch to the ACC or ON
position,
and
then
push
the
ON
z
OFF/VOLUME control knob while the
system is off to call up the mode (radio,
CD, DVD or AUX — if so equipped) which
was playing immediately before the
system was turned off. While the system
is on, pushing the ON
z
OFF/VOLUME con-
trol knob turns the system off.
Turn the ON
z
OFF/VOLUME control knob to
adjust the volume.
Adjusting tone quality and speaker
balance:
To adjust Bass, Treble, Balance and Fade,
push the Audio control knob. When the
display shows the setting you want to
change (Bass, Treble, Balance and Fade),
rotate the Audio control knob to set the
desired setting. For the other setting
methods, refer to “How to use
SETTING
button” earlier in this section.
This vehicle has some sound effect func-
tions as follows (if so equipped):
O
BOSE Centerpoint
O
BOSE AudioPilot
O
Precision Phased Audio
O
Speed sensitive Volume
For more details, see “Vehicle information
and settings” earlier in this section.
FM-AM-SAT radio operation
RADIO (FM/AM/SAT) band select:
Pushing the RADIO band select button will
change the band as follows:
AM
→
FM
→
SAT (XM/SR)
→
AM
When the RADIO band select button is
pushed while the ignition switch is in the
ACC or ON position, the radio will come
on at the station last played.
The last station/channel played will also
come on when the ON
z
OFF/VOLUME con-
trol knob is pushed to ON.
The satellite radio mode will be skipped un-
less an optional satellite receiver and an-
tenna are installed and an XM or SIRIUS
TM
satellite radio service subscription is active.
Satellite radio is not available in Alaska, Ha-
waii and Guam.
If another audio source is playing when
the RADIO band select button is turned to
ON, the other audio source will automati-
cally be turned off and the last radio sta-
tion played will come on.
When the stereo broadcast signal is
weak, the radio will automatically change
from stereo to monaural reception.
TUNE (Tuning):
O
For AM and FM radio
Turn the TUNE/FOLDER knob for
manual tuning.
O
For satellite radio
Turn the TUNE/FOLDER knob to seek
channels from all of the categories
when any CAT is not selected.
SEEK/SCAN tuning:
O
For AM and FM radio
Push the SEEK/TRACK button
or
for less than 1.5 seconds to tune
from high to low or low to high fre-
quencies and to stop at each broad-
casting station for 5 seconds. Pushing
the button again during this 5 second
period will stop SCAN turning and the
radio will remain tuned to that station.
Push the SEEK/TRACK button
or
for more than 1.5 seconds to tune
from high to low or low to high fre-
quencies and to stop at each broad-
4-38
Monitor, climate, audio, phone and voice recognition systems
w
06.6.8/Y50-D
X