![background image](/i/infiniti/150404/infiniti-m35-2007-m45-2007/h/infiniti-m35-2007-m45-2007-038.png)
3. Secure the child restraint anchor at-
tachments to the LATCH lower an-
chors.
4. The back of the child restraint should
be secured against the vehicle seat-
back. If necessary, adjust or remove
the head restraint to obtain the cor-
rect child restraint fit. See “Head re-
straint adjustment” in this section. If
the head restraint is removed, store it
in a secure place. Be sure to install
the head restraint when the child re-
straint is removed. If the seating posi-
tion does not have an adjustable head
restraint and it is interfering with the
proper child restraint fit, try another
seating position or a different child re-
straint.
5. For child restraints that are equipped
with webbing mounted attachments,
remove any additional slack from the
anchor attachments. Press downward
and rearward firmly in the center of
the child restraint with your knee to
compress the vehicle seat cushion and
seatback while tightening the webbing
of the anchor attachments.
6. If the child restraint is equipped with
a top tether strap, route the top tether
strap and secure the tether strap to
the tether anchor point. See “Top
tether strap child restraint” in this
section.
SSS0646
Front facing − step 3
SSS0647
Front facing − step 5
1-22
Safety — Seats, seat belts and supplemental restraint system
w
06.3.30/Y50-D
X