![background image](/i/infiniti/150404/infiniti-m35-2007-m45-2007/h/infiniti-m35-2007-m45-2007-050.png)
O
If the booster seat is compatible with
your vehicle, place your child in the
booster seat and check the various
adjustments to be sure the booster
seat is compatible with your child. Al-
ways follow all recommended proce-
dures.
All U.S. states and Canadian provinces or
territories require that infants and small
children be restrained in an approved child
restraint at all times while the vehicle is
being operated.
The instructions in this section apply to
booster seat installation in the rear seats
or the front passenger seat.
BOOSTER SEAT INSTALLATION
WARNING
INFINITI recommends that booster seats be
installed in the rear seat. However, if you
must install a booster seat in the front pas-
senger seat, move the passenger’s seat to
the rearmost position.
CAUTION
Do not use the lap/shoulder belt automatic
locking mode when using a booster seat
with the seat belts.
Follow these steps to install a booster
seat in the rear seat or in the front pas-
senger seat:
1. If your vehicle is equipped with rear
power seat adjustment, adjust the rear
outboard seats to the uplight and re-
armost position.
O
Do not move the rear outboard seats
with the booster seat attached to
them.
2. If you must install a booster seat in the
front seat, move the seat to the rear-
most position.
3. Position the booster seat on the seat.
Only place it in a front facing direc-
tion. Always follow the booster seat
manufacturer’s instructions.
LRS0464
SSS0640
1-34
Safety — Seats, seat belts and supplemental restraint system
w
06.6.7/Y50-D
X