![background image](/i/kawasaki/160046/kawasaki-er5-2004/h/kawasaki-er5-2004-193.png)
FINAL DRIVE 10-9
Drive Chain
•
Fit the plate holder (A) to the link plate.
•
Turn the pin holder by hand until the plate holder (B)
touches the other link plate.
•
Turn the pin holder by a wrench clockwise until two pins
of link come into groove of the plate holder (A).
•
Take off the plate holder.
•
Set the plate holder (B) [A] and cutting and rivetting pin
[B] as shown.
•
Turn the pin holder until the rivetting pin touches the link
pin.
•
Turn the wrench clockwise until the tip of rivetting pin con-
tact with the link pin.
•
Rivet it.
•
Repeat the same procedure for the other link pin.