![background image](/i/kawasaki/160046/kawasaki-er5-2004/h/kawasaki-er5-2004-310.png)
15-52 ELECTRICAL SYSTEM
Lighting System
•
Connect the hand tester [A] and 12 V battery [B] to the
starter circuit relay [C] as shown.
If the relay does not work as specified, the relay is defec-
tive. Replace the relay.
Testing Relay
Tester Range:
× 1
Ω
Criteria:
When battery is connected
→
0
Ω
When battery is disconnected
→ ∞ Ω
Relay Coil Terminal [1] and [2]
Relay Switch Terminal [3] and [4]
Special Tool - Hand Tester: 57001-1394
Headlight Beam Horizontal Adjustment
•
Turn the horizontal adjuster [A] on the headlight rim in
or nut until the beam points straight ahead. Turning the
adjusting screw clockwise moves the headlight beam to
the left.
Headlight Beam Vertical Adjustment
•
Turn the vertical adjuster [B] on the headlight rim in or out
to adjust the headlight vertically.
NOTE
○
On high beam, the brightest point should be slightly be-
low horizontal with the motorcycle on its wheels and
rider seated. Adjust the headlight to the proper angle
according to local regulations.
Headlight Bulb Replacement
•
Remove:
Headlight Unit and Dust Cover [A]
Hook [B]
•
Replace the headlight bulb [C].
CAUTION
When handling the quartz-hologen bulb, never
touch the glass portion with bare hands. Always
use a clean cloth. Oil contamination from hands or
dirty rags can reduce bulb life or cause the bulb to
explode.