![background image](/i/kawasaki/160046/kawasaki-er5-2004/h/kawasaki-er5-2004-078.png)
3-16 COOLING SYSTEM
Radiator Fan Switch, Water Temperature Switch
CAUTION
The fan switch or the water temperature switch
should never be allowed to fall on a hard surface.
Such a shock to these parts can damage them.
Radiator Fan Switch Removal
•
Pull out the cover [A].
•
Disconnect the fan switch connector [B].
•
Remove the radiator fan switch [C].
Water Temperature Switch Removal
•
Drain the coolant.
•
Remove the fuel tank (see Fuel System chapter).
•
Disconnect the lead [A] and remove the water tempera-
ture switch [B].
Radiator Fan Switch, Water Temperature Switch
Installation
•
Apply silicone sealant to the threads before mounting the
water temperature switch.
Sealant - Kawasaki Bond (Silicone Sealant): 56019-120
○
Do not apply silicone sealant to the radiator fan switch on
the radiator.
•
Tighten the water temperature switch and the fan switch.
Torque - Water Temperature Switch: 7.8 N·m (0.80 kgf·m,
69 in·lb)
Radiator Fan Switch: 18 N·m (1.8 kgf·m, 13.0 ft·lb)
Radiator Fan Switch, Water Temperature Switch
Inspection
•
Refer to the Electrical System chapter for these inspec-
tions.