![background image](/i/kawasaki/160046/kawasaki-er5-2004/h/kawasaki-er5-2004-217.png)
BRAKES 11-19
Brake Pedal and Cable
Brake Pedal Removal
•
Remove:
Adjuster [A]
Clevis Pin [B]
Return Spring [C]
•
Remove the brake rod rear end.
•
Loosen the locknut and turn in the adjusting bolt to keep
the pedal free from it.
•
Unscrew the right footpeg bracket bolts [A].
•
Remove
Rear Brake Light Switch Return Spring [A]
Brake Return Spring [B]
Take off the footpeg bracket
•
Unscrew the brake pedal bolt [A] and pull out the brake
pedal [B].
Brake Pedal Installation
•
Install the brake rod rear end.
•
Grease the brake shaft.
•
Tighten the brake pedal bolt.
Torque - Brake Pedal Bolt: 8.8 N·m (0.90 kgf·m, 78 in·lb)
•
Adjust the brake pedal position and free play (see this
chapter).