9

ENG

ENGLISH

9

EXTERNAL CONTROL DEVICE SETUP

*  Digital Terrestrial/Cable/Satellite

[Data 00][Data 01]: Channel Data

Data 00 : High Channel data

Data 01 : Low Channel data

  - 00 00 ~ 27 0F (Decimal: 0 ~ 9999)

Data 02 : Input Source (Digital)

  - 10 : Terrestrial TV (DTV)

  - 20 : Terrestrial Radio (Radio)

  - 40 : Satellite TV (SDTV)

  - 50 : Satellite Radio (S-Radio)

  - 90 : Cable TV (CADTV)

  - a0 : Cable Radio (CA-Radio)

*  Tune Command Examples:

1. Tune to the analogue terrestrial (PAL) Channel 10. 

Set ID = All = 00 

Data 00 & 01 = Channel Data is 10 = 00 0a 

Data 02 = Analogue Terrestrial TV = 00 

Result = 

ma 00 00 0a 00

2. Tune to the digital terrestrial (DVB-T) Channel 01. 

Set ID = All = 00 

Data 00 & 01 = Channel Data is 1 = 00 01 

Data 02 = Digital Terrestrial TV = 10 

Result = 

ma 00 00 01 10

3. Tune to the satellite (DVB-S) Channel 1000. 

Set ID = All = 00 

Data 00 & 01 = Channel Data is 1000 = 03 E8 

Data 02 = Digital Satellite TV = 40 

Result = 

ma 00 03 E8 40

Ack [a][ ][Set ID][ ][OK][Data 00][Data 01][Data 02][x]
[a][ ][Set ID][ ][NG][Data 00][x]

• 

For South Korea, North/Latin America except 

Colombia Model

►

To tune channel to following physical/major/minor 

number.

Transmission [m][a][ ][0][ ][Data00][ ][Data01]
[ ][Data02][ ][Data03][ ][Data04][ ][Data05][Cr]

Digital channels have a Physical, Major, and Minor 

channel number. The Physical number is the actual 

digital channel number, the Major is the number that 

the channel should be mapped to, and the Minor is 

the sub-channel. Since the ATSC tuner automatically 

maps the channel from the Major / Minor number, 

the Physical number is not required when sending a 

command in Digital.
*  Analogue Terrestrial/Cable

Data 00  : Physical Channel Number

  - Terrestrial (ATV) : 02~45 (Decimal: 2 ~ 69)

  -  Cable (CATV) : 01, 0E~7D (Decimal : 1, 14~125)

[Data 01 ~ 04]: Major/Minor Channel Number

Data 01 & 02: xx (Don't care)

Data 03 & 04: xx (Don't care)

Data 05: Input Source (Analogue)

  - 00 : Terrestrial TV (ATV)

  - 01 : Cable TV (CATV)
*  Digital Terrestrial/Cable

Data 00 : xx (Don't care)

[Data 01][Data 02]: Major Channel Number

Data 01 : High byte Channel Data

Data 02 : Low byte Channel Data

  - 00 01 ~ 27 0F (Decimal: 1 ~ 9999)

[Data 03][Data 04]: Minor Channel Number

Data 03 : High byte Channel Data

Data 04 : Low byte Channel Data

Data 05 : Input Source (Digital)

  - 02 :  Terrestrial TV (DTV) – Use Physical Channel 

Number

  - 06 :  Cable TV (CADTV) – Use Physical Channel 

Number

  - 22 :  Terrestrial TV (DTV) – Don’t Use Physical 

Channel Number

  - 26 :  Cable TV (CADTV) - Don’t Use Physical 

Channel Number

  - 46 :  Cable TV (CADTV) – Use Major Channel 

Number Only (One Part Channel)

Two bytes are available for each major and minor 

channel data, but usually the low byte is used alone 

(high byte is 0). 

* Tune Command Examples:

1.  Tune to the analogue cable (NTSC) channel 35. 

Set ID = All = 00 

Data 00 = Channel Data is 35 = 23 

Data 01 & 02 = No Major = 00 00 

Data 03 & 04 = No Minor = 00 00 

Data 05 = Analogue Cable TV = 01 

Total = 

ma 00 23 00 00 00 00 01

2.  Tune to the digital terrestrial (ATSC) channel 30-3. 

Set ID = All = 00 

Data 00 = Don’t know Physical = 00 

Data 01 & 02 = Major is 30 = 00 1E 

Data 03 & 04 = Minor is 3 = 00 03 

Data 05 = Digital Terrestrial TV = 22 

Total = 

ma 00 00 00 1E 00 03 22

Ack [a][ ][Set ID][ ][OK][Data 00][Data 01]
[Data 02][Data 03][Data 04][Data 05]
[x][a][ ][Set ID][ ][NG][Data 00][x]

• 

For Japan Model

►

To tune channel to following physical/major/minor 

number.

Transmission [m][a][ ][0][ ][Data00][ ][Data01]
[ ][Data02][ ][Data03][ ][Data04][ ][Data05][Cr]

*  Digital Terrestrial/Satellite

Data 00: xx (Don't care)