![background image](/i/line-6/137602/line-6-spider-valve-mkii-hd100-spider-valve-mkii-112-spider-valve-mkii-212/h/line-6-spider-valve-mkii-hd100-spider-valve-mkii-112-spider-valve-mkii-212-020.png)
SmartFX
4•4
Here are a few important points to remember regarding SmartFX customization:
• In Edit Mode, if you change any parameters for one of the SmartFX, your settings
will remain fixed where you set them, even when you turn the SmartFX knob
• Parameters that you do not change will default to the pre-programmed SmartFX
settings for that effect
• Only 1 effect per SmartFX knob can be customized at a time (its LED will be purple)
• SmartFX customization settings are saved with each preset
• If you turn the SmartFX knob to the Off position, customization will be lost and all
effects for that SmartFX knob will revert to the default settings
To see what the individual settings are, select a setting on the FX1 knob, press the Presets
knob to enter Edit Mode, then use the up/down arrows to navigate thru the various Pitch
Glide parameters.
If you decide to customize your Pitch Glide settings, keep in mind that the note pitch will
be determined by a combination of Heel value, Toe value, and Pedal Position. With no
pedal connected and POS value set at 0, the Heel value determines the note you hear.
Pitch Glide Tips
When you turn the FX1 knob to the Pitch position, the Pitch Glide effect will be activated.
Listen as you turn the FX1 knob slowly thru all the different SmartFX settings. Along with
your original note, you’ll hear a 2nd note 2 octaves down, 1 octave down, then -9, -7, -5,
-4, -3, +3, +5,+7, +9 (in semitones), 1 octave up and 2 octaves up. Mix is set at 44%.
For example, with Heel at +7 and POS at 0, you get a 5th note, which is 7 half steps up.