![background image](/i/line-6/137602/line-6-spider-valve-mkii-hd100-spider-valve-mkii-112-spider-valve-mkii-212/h/line-6-spider-valve-mkii-hd100-spider-valve-mkii-112-spider-valve-mkii-212-007.png)
Overview
1•3
7
Smart FX Controls –
Spin one of these 3 knobs to select great FX, fast and
easy. Each FX knob lets you choose one of 3 primary or 3 secondary FX Models, for a total
of 18 possibilities, with up to 3 active at once.
The lit LED indicates the active effect, either amber or blue. If an effect’s settings have been
customized, its LED will be purple. *See
Chapter 4•3
for more info on FX Customization.
Turning an FX knob all the way off disables the effect and resets any customization.
FX-1 Knob:
selects Red Comp or Fuzz Pi, Auto Wah or Auto Swell, Pitch Glide or Smart
Harmony, with a pre-set range of settings for each effect.
FX-2 Knob:
selects Chorus or Flanger, Phaser or U-Vibe, Opto or Bias Trem, again with
a range of settings for each effect.
FX-3 Knob:
selects Digital Delay or Analog Delay w/Mod, Tape Echo or Multi-Head,
Sweep Echo or Reverse, with a range of settings. The
Tap
LED flashes the delay time.
When you turn any of the 3 FX knobs, the
Momentary FX Display
will show you the
current FX Model name. To select the alternate model, turn the Presets knob while the
Momentary FX Display is showing. Your selection will be stored in that FX location per
saved preset.
8
Tap –
To set your tempo for time-based Mod and Delay FX, press the Tap button
at least twice at the desired tempo. When Tap is set to
Don’t Control
in Edit Mode, set
the Delay time or Mod speed manually and it will remain independent of the Tap tempo.
7
9
10
11
8
12
13
14
15
16
17