![background image](/i/loewe/154190/loewe-mediavision-3d/h/loewe-mediavision-3d-020.png)
Start-up
Audio Menu
You can make various sound settings in the
Audio
Menu.
: Off
: Off
: Off
: Off
: DIGITAL IN
: 0 ms
Speaker Setup
Loudness
DRC (Night Mode)
Wireless Speakers
Preamplifi er
TV Input
HD AV Sync
Audio
Language
Display
Dolby PL II
Lock
Network
Others
Call up the Main Menu.
3456
Select the
Setup
option.
5
6
Select the
Audio
option.
Speaker set-up
If you have connected a speaker system to
MediaVision
11), you can make the necessary settings here.
Press
OK
to confirm.
Front L
0
100 Hz
2,1m (7ft)
Speaker Setup
Speaker
Volume
Connection
Distance
Test
OK
Cancel
345
6
Select desired option.
Speaker
Select the speaker to be set
Connection
Select the limit frequency of the selected speaker
(see its technical data). To use the TV loudspeaker as
the centre loudspeaker, select the option
Center
(page
21) in the
Speaker
settings and select the option
TV
in the
Connection
settings.
Volume
Set the volume level of the selected speaker so that
you can hear it at the listening position with the same
volume as the other speaker
Distance
Set the distance from the speaker to your listening
position
Test
Switch on the test signal for setting the volume off/on
Confirm with
OK
.
Audio delay (HD AV Sync)
If you use the HDMI socket, you can set an audio delay (for e.g. lip synchronous
sound transmission).
56
Set a value between
0
and
300 ms
(for the configuration
DRC (Night Mode)
You can use the DRC function to limit the dynamics (in other words, the difference
between the loudest and quietest sounds). In this way, you can also play a Movie
with lower volume differences (e.g. at night).
Auto
Select this option if you wish to play audio signals
with the coding Dolby True HD with reduced
dynamics
OFF
Audio signals are played with the full dynamic range
ON
Select this option if you wish to play audio signals
with the coding Dolby Digital or Dolby Digital Plus
with reduced dynamics
Wireless Speaker
A system interface
Wireless Audio-Link
is integrated in your
MediaVision 3D
.
You can use this to connect your compatible Loewe subwoofer to
MediaVision 3D
without any annoying cables. This connection must be registered once.
Call up the
Setup
Menu.
5
6
Select the
Audio
option.
45
6
Select the option
Wireless Speaker
. Press
OK
.
:
:
:
Audio
Language
Display
Cancel
OK
Pairing of Wireless Speakers
Start pairing with OK. Then you have one mi-
nute to press pairing button at your subwoofer
to confi rm.
Speaker Setup
Dolby PL II
Lock
Network
Others
Select the
On
option. Press
OK
to confirm.
You now have a minute time in which you can press the button
for the coupling mode for your compatible Loewe subwoofer. A
notice will appear if the registration is successful. If the registra-
tion is not successful, please try again and reduce the distance
between the subwoofer and
MediaVision
.
- 20