5 -
Recording Menu
Rec Mode Set
You can set the picture quality for recording:
DVD+/-R/RW (4,7 GB)
HQ mode:
approx. 1 hour.
SQ mode:
hours.
LQ mode:
4 hours.
EQ mode:
6 hours.
HDD (160 GB)
HQ mode:
approx. 43 hours.
SQ mode:
approx. 80 hours.
LQ mode:
approx. 15 hours.
EQ mode:
approx. 7 hours.
OK
OK
Rec Mode Set
Rec Aspect
DV Rec Audio
TV Rec Audio
Auto Chapter
AV2 Recording
EQ
LQ
SQ
HQ
3
Prev.
Select
Move
Call menu.
5
6
Select symbol
Record.
4
Call second level.
5
6
Select
Rec Mode Set.
4
Call third level.
56
Set desired recording quality (EQ, LQ, SQ or HQ).
Confirm with
OK
.
Rec Aspect
You can adapt the picture format (16:9 or 4:3) to the material being recorded
during the recording.
DV Rec Audio
You need to use this setting if your camcorder with
3 KHz / 1-bit is connected to the
DV IN
socket on the front panel.
Some digital camcorders have two stereo tracks for audio. One is used for record-
ing, the other is used for post-editing.
On the
Audio 1
setting the original sound is recorded.
On the
Audio 2
setting the edited sound is used.
OK
OK
Rec Mode Set
Rec Aspect
DV Rec Audio
TV Rec Audio
Auto Chapter
AV2 Recording
Audio 1
Audio 2
3
Prev.
Select
Move
TV Rec Audio
When recording bilingual TV you can select the audio channel to be recorded.
.
Audio 1+2
: both languages are recorded.
Audio 1:
language 1 only.
Audio 2:
language only.
Auto Chapter
Chapter start marks are inserted at fixed intervals in recordings on DVDs in video
mode. You can select intervals of 5, 10 or 15 minutes. If you select
None
automatic
chapter setting is switched off.
OK
OK
Rec Mode Set
Rec Aspect
DV Rec Audio
TV Rec Audio
Auto Chapter
AV2 Recording
None
5 Min
10 Min
15 Min
3
Prev.
Select
Move
AV2 Recording
The signal type can be selected to record the video in signal of a device connected
to the
EURO AV2
DECODER
.
Auto
The video in signal is adapted automatically to the received
video signal.
CVBS
Only for recording a CVBS input signal.
RGB
Only for recording an RGB input signal.
Initial Installation
