![background image](/i/loewe/165223/loewe-viewvision-dr/h/loewe-viewvision-dr-058.png)
- 58
Troubleshooting
Problem
Possible cause
Remedy
A disc that was recorded to from this Recorder
cannot be played on a different DVD player.
Some players do not play discs with finalisation in
video mode.
No solution.
The disc was recorded in VR mode.
The other player must be RW-compatible.
The ability of CD-R / RWs (MP3/WMA, JPEG,
(X)VCD, (X)SVCD) and DVD+R / RWs and DVD-R
/ RWs is influenced by the recording equipment,
recording methods and data media. Therefore,
there may be problems occasionally when playing
on conventional DVD players.
No solution.
Playback not possible or unsuccessful.
There is insufficient space on the disc.
Use a different disc.
The source that you want to record is copy-protected.
You cannot record the source.
Copy-protected broadcasts cannot be recorded on a
video mode disc.
Use a disc formatted in the VR mode for once copiable
material.
Timer recording not possible.
The time has not been set correctly on the recorder.
Set the correct time. See “Setting the time automatically“ or
“Setting the time manually“ on page 0.
The timer was wrongly programmed.
Re-program the timer. See “Timer recording“ on page 43.
The time between programming the timer and the
start of recording is too short.
The recording‘s start time must be at least 3 minutes into the
future.
After programming, the timer recording LED is no
longer displayed.
Re-program the timer.
Stereo-audio recording and/or playback
unavailable.
The television is not stereo-compatible or the
broadcast transmission is not in stereo format.
No solution.
The Recorder’s A/V Out sockets are not connected
to the TV’s A/V In sockets.
Make the A/V connections.
The Recorder’s audio/video Out has not been
selected for the television.
Select the AUX or A/V source as the TV input.
The DVD recorder’s TV audio channel must be set
to Mono.
Set the TV’s audio channel to stereo.
The remote control is not working properly.
The remote control’s batteries have run out.
Replace the old batteries with new ones.
Interference is visible at the top and
bottom edges of the screen.
Unfavourable resolution setting in HDMI mode.
Set the resolution to 1080i with the
RES
button (page 9).