Chapter 4: Edit Mode
14
Keystation Mini 32 User Guide
To change the MIDI Channel number:
1
Press the Edit button to enter Edit Mode. The Edit button will illuminate to full brightness.
2
Press the “DATA = CHANNEL” (named C#, 6th black key from the left). The Edit button light will return
to half-brightness.
3
Press the Octave/Data “+” or “-” button to step upwards or downwards through the MIDI Channel num-
bers.
Tuning
The Tuning function can be used to alter the instrument being controlled to have its pitch shifted to be
slightly sharp or slightly flat. The default Tuning value is 64, and it can be raised to 128 or lowered to 0 as de-
scribed below.
To assign the “+” and “-” keys to control the Tuning function:
1
Press the Edit button to enter into Edit Mode. The Edit button light will illuminate to full brightness.
2
Press the “DATA = TUNING” key (D#, seventh black key from the right). The Edit button will return to
half-brightness. The Oct/Data “+” button will illuminate green, and the “-” button will be red.
3
Press “+” or “-” while continuing to play notes until the instrument is tuned to the pitch that you want.
To return the turning to the default setting (concert pitch):
Press the “Oct/Data” “-” and “+” buttons simultaneously. Both buttons will return to their default value of Red
at half-brightness.
Pressing both the “+” and “-” buttons together will recall Channel 1.
When Channel 16 is reached and “+” is pressed, Channel 1 will be selected. The lights above the buttons will not change,
since it is not possible to have a Channel with a negative value. For example, if a device specifies that you need to send
data on Channel 10, press the + button nine times to change from the channel 1 to select Channel 10.
The Data=Channel value is retained when the keyboard is turned off.
Check your third party hardware or software documentation to confirm that your sound source responds
to “MIDI Master Tune.”
Selecting a value below the default setting of 64, changes the Oct/Data “-” button from Red to Green. Selecting a value
greater than 64, changes the “Oct/Data” “+” button to Red.
CA
N
C
E
L
Panic
P
B
Rate
V
elocity
Sust
ain Mode
Default
0
1
2
3
4
5
6
7
8
9
EN
T
E
R
Dat
a = Oct
acve
Dat
a = T
ranspose
Dat
a = Program
Dat
a = B
ank L
S
B
Dat
a = B
ank M
S
B
Dat
a = Channel
Dat
a = T
uning
Program
B
ank L
S
B
B
ank M
S
B
Mod Assign
P
B
Assign
K
nob Assign
Mod Rate
