14
ENGLISH
play (3) and the «RICE» cooking program
indicator will be flashing.
•
Press the cooking program «RICE», the pro-
gram will switch on in 10 seconds, the sym-
bol «
» will be shown on the display (3),
and the «RICE» button indicator will glow
constantly.
Notes:
– In the «RICE» cooking program the program
operation time is set by default, you cannot
change the cooking time
(see the Cooking
Programs table).
– Do not use the bowl (12) for washing cereals
and do not chop products in it, this can dam-
age the non-stick coating.
– Before installing the bowl (12) make sure that
there are no foreign objects, dirt or moisture
in the process chamber and on the bottom of
the bowl (12);
– There is a temperature sensor (11) in the
middle of the heating element (10); make
sure that nothing prevents free sensor move-
ment.
•
If you steam products, pour water into the
bowl (12) so that boiling water does not reach
the bottom of the basket (13). Put the basket
with food (13) into the bowl (12).
•
To select the required cooking program,
press one of the buttons (22), the corre-
sponding cooking program indicator will light
up, the program cooking time set by default
will be shown on the display (3).
Note:
•
The «MULTIMODE» program is intended for
advanced users with sufficient cooking experi-
ence. This program allows you to set the cook-
ing temperature within the range from +30° to
+160°C, and the cooking time (from 5 minutes
to 10 hours) according to your preferences
and cooking experience.
•
To change the cooking program time choose
the buttons (21) «-/+», digital value of cooking
time will be shown on the display (3) (see the
Cooking Programs table).
•
Set the delayed start function, if necessary.
(see the «DELAYED START» button (20) item).
If you want to start cooking immediately, skip
this step.
•
If you did not make any changes into the cook-
ing program operation, then in 10 seconds you
will hear a sound signal, the selected cooking
program will be switched on, the time remain-
ing till the end of the program will be shown
on the display (3), and separating dots will be
flashing.
•
To reset program settings or cancel the cook-
ing program, press the «KEEP WARM/STOP»
(17) button, the «8888» symbols will light up on
the display (3).
•
When the cooking program will be finished you
will hear sound signals, the unit will be auto-
matically switched to the keep warm mode
(except for the «Roasting», «Jelly» programs),
the display (3) will show time of the multicooker
operation in the keep warm mode.
•
To switch the keep warm mode off, press the
«KEEP WARM/STOP» button (17).
•
You may switch the keep warm mode on, if
needed, by pressing the button (17) «KEEP
WARM/STOP».
Notes:
- Despite the unit keeps the ready dish warm
for 24 hours, it is not recommended to leave the
cooked food in the bowl for a long time, because
this may spoil the food.
Do not use the keep warm function to heat up
products.
Attention!
•
Never leave the operating unit unattended.
•
To avoid scalding be very careful when
opening the lid (4), do not bend over the
steam valve (7) during multicooker opera-
tion and do not place open parts of your
body above the bowl (12)!
•
During the first operation of the multicook-
er, some foreign smell from the heating
element can appear. It is normal.
•
Watch the food during cooking and, if nec-
essary, stir the products with the plastic
soup ladle (14) or spatula (15). Do not use
metal objects that can scratch the non-
stick coating of the bowl (12).
•
You can use the holder on the unit body to
store the soup ladle (14) or spatula (15).
Memory function
•
In case of emergency power cutoff during the
multicooker operation, the memory function
with the duration of up to 10 minutes is acti-
vated.
•
If the power supply is restored within 10 min-
utes, the multicooker will continue to perform
the pre-set program from the moment it was
stopped at.
•
If there is no power for more than 10 minutes,
program the unit again.
RECOMMENDATIONS
You can use the «MULTIMODE» program for
dough proofing.
Dough rest is a stage of dough making that takes
MW-3815.indd 14
30.05.2014 12:08:49
