33

English

04

Advanced Featur

es

Network Setup (Ad-Hoc)

You can connect to a mobile device without an access point 
through the “Samsung Wireless LAN Adapter” by using a 
peer to peer network.

This function is available when 

✎

SWL(Samsung 

Wireless Link)

 is set to 

Off

.

How to connect to new Ad-hoc device
1. 

Follow Steps 1 through 6 in the “How to set up using 
PBC (WPS)” (p. 31). 

2. 

Choose 

Select a network

. A list of devices/networks 

appears. 

3. 

While in the device list, press the Blue button on the 
remote.

The message 

✎

Ad-hoc is a direct WI-Fi 

connection with cellphone or PC.

The existing 

network system may have limited functionality. 
Do you want to change the network 
connection?

 is displayed.

4. 

Input the generated 

Network Name (SSID)

 and 

Security Key

 into the device you want to connect.

How to connect an existing Ad-hoc device
1. 

Follow Steps 1 through 6 in the “How to set up using 
PBC (WPS)” (p. 31). 

2. 

Choose 

Select a network

. The Device/Network list 

appears. 

3. 

Select the device you want in the Device list. 

4. 

If security key is required, input the security key.

If network doesn’t operate normally, check 

✎

the 

Network Name (SSID)

 and 

Security Key

again. An incorrect 

Security Key

 may cause a 

malfunction.

Network Setup (Manual)

If the other methods do not work, you need to enter the 
Network setting values manually.

Getting the Network Connection Values

To get the Network connection values on most Windows 
computers, follow these steps:

1. 

Right click the Network icon on the bottom right of the 
screen.

2. 

In the pop-up menu, click Status.

3. 

On the dialog that appears, click the Support tab.

4. 

On the Support tab, click the Details button. The 
Network settings are displayed.

How to set up manually

To enter the Network connection values manually, follow 
these steps:

1. 

Follow Steps 1 through 6 in the “How to set up using 
PBC (WPS)” (p. 31).

2. 

Press the 

▼

 button to select 

Internet Protocol Setup

, 

and then press the 

ENTER

E

 button. Press the 

▲

or 

▼

 button to select 

Manual

, and then press the 

ENTER

E

 button.

3. 

Press the 

▼

 button to go to the first entry field  

(IP Address).

4. 

Use the number buttons to enter numbers.

5. 

When done with each field, use the 

►

 button to move 

successively to the next field. You can also use the other 
arrow buttons to move up, down, and back.

6. 

Enter the 

IP Address

, 

Subnet Mask

, and 

Gateway

values.

7. 

Press the 

▲

 or 

▼

 button to go to 

DNS

.

8. 

Press the 

▼

 button to go to the first DNS entry field. 

Enter the numbers as above.

9. 

When done, press the 

▲

 button to go to 

Select a 

Network

. Select your network, and then press the 

ENTER

E

 button.

10. 

Go to Step 4 in the “How to set up automatically”  
(p. 32), and follow the directions from that point on.

BN68-02808A_Eng.indb   33

2010-05-18   �� 10:26:23