English - 18

Setting up the TV with your PC

Preset: Press the 

N

SOURCE

 button to select 

PC

 mode.

Auto Adjustment

❑

Auto Adjustment allows the PC screen of set to self-adjust to the incoming PC video 

signal. The values of fine, coarse and position are adjusted automatically.

This function does not work in DVI-HDMI mode.

N

Press the 

T

TOOLS

 button to display 

Tools

 menu.  

You can also set the auto adjustment by selecting 

Tools → Auto Adjustment

.

Screen

❑

The purpose of picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by Fine-tuning alone, 

then adjust the frequency as best as possible (Coarse) and Fine-tune again. After the noise has been reduced, readjust the picture 

so that it is aligned on the center of screen.

Coarse

„

Adjusts the frequency when vertical noise appears on the screen.

Fine

„

Adjusts the screen to be clearer.

PC Position

„

Adjust the PC’s screen positioning if it does not fit the TV screen. Press the ▲ or ▼ button to adjusting the Vertical-Position. 

Press the ◄ or ► button to adjust the Horizontal-Position.

Image Reset

„

You can replace all image settings with the factory default values.

Picture Reset → 

❑

Reset Picture Mode / Cancel

Resets all picture settings to the default values.

Select a picture mode to be reset. The reset is performed for each picture mode. 

N

Brightness 

: 45

Sharpness 

: 50

Auto Adjustment   

►

Screen  
Advanced Settings 

Picture Options 

Picture Reset 

Picture

Picture

Advanced Settings

Picture Options 

Picture Reset 

►

Picture

BN68-02333F-Eng.indb   18

2009-08-26   �� 4:00:12