English - 52

Setting Up Anynet

+

Anynet

❑

+

(HDMI-CEC) 

Setup

Press the 

T

TOOLS

 button to display 

Tools

 menu.  

You can also display Anynet+ menu by selecting 

Tools

 → 

Anynet

+

(HDMI-CEC)

.

Anynet

„

+

(HDMI-CEC) → Off / On 

To use the Anynet

+

 Function, 

Anynet

+

 (HDMI-CEC)

 must be set to 

On

.

When the 

N

Anynet

+

 (HDMI-CEC)

 function is disabled, all the Anynet+ related 

operations are deactivated.

Auto Turn Off → No / Yes

„

Setting an Anynet

+

 Device to turn Off Automatically when the TV is Turned Off

The active source on the TV remote must be set to TV to use the Anynet+ function.

N

If you set 

N

Auto Turn Off

 to 

Yes

, connected external devices are also turned off 

when the TV is turned off. If an external device is still recording, it may or may not 

turn off. 

Switching between Anynet

+

 Devices

1. 

Press the 

TOOLS

 button. Press the 

ENTER

E

 button to select 

Anynet

+

 (HDMI-CEC)

.

2. 

Press the ▲ or ▼ button to select 

Device List

, then press the 

ENTER

E

 button.

Anynet+ devices connected to the TV are listed. If you cannot find a device you 

N

want, press the red button to scan for devices.
Only when you set 

N

Anynet

+

 (HDMI-CEC)

 to 

On

 in the 

Setup

 menu, the 

Device List

menu appears.

3. 

Press the ▲ or ▼ button to select to a particular device and press the 

ENTER

E

button. It is switched to the selected device.

Switching to the selected devices may take up to 2 minutes. You cannot cancel the operation during the switching operation.

N

The time required to scan for devices is determined by the number of connected devices.

N

If you have selected external input mode by pressing the 

N

SOURCE

 button, you cannot use the Anynet+ function. Make sure to 

switch to an Anynet

+

 device by using the 

TOOLS

 button.

Anynet

❑

+

 Menu

The 

Anynet

+

menu changes depending on the type and status of the Anynet

+

 devices connected to the TV.

Anynet

+

 Menu

Description

View TV

Anynet

+

 mode changes to TV broadcast mode.

Device List

Shows the Anynet+ device list.

(device_name) MENU

Shows the connected device menus. E.g. If a DVD recorder is connected, the disc menu of the DVD 

recorder will appear.

(device_name) INFO

Shows the play menu of the connected device. E.g. If a DVD recorder is connected, the play menu of 

the DVD recorder will appear.

Recording: (*recorder)

Starts recording immediately using the recorder. (This is only available for devices that support the 

recording function.)

(*recorder) Reserve Recording

Enables reserving a recording for the recorder. (This is only available for devices that support the 

recording reservation function.)

Stop Recording: (*recorder)

Stops recording.

Receiver

Sound is played through the receiver.

Continued...

Application

Media Play (USB & DLNA)

Anynet+ (HDMI-CEC) 

►

Content Library
Internet@TV
Home Network Centre

U

Move         

E

 Enter         

R

Return

Anynet+(HDMI-CEC) 

: On 

▶

Auto Turn Off 

: Yes 

U

Move         

E

 Enter         

R

Return

View TV

Device List

Recording 

: DVDR

DVDR MENU
DVDR INFO

Receiver  

: On 

Setup

BN68-02333F-Eng.indb   52

2009-08-26   �� 4:00:47