English - 54

Listening through a Receiver

You can listen to sound through a receiver instead of the TV speaker.

1. 

Press the 

TOOLS

 button. Press the 

ENTER

E

 button to select 

Anynet+ (HDMI-CEC)

.

2. 

Press the ▲ or ▼ button to select 

Receiver

. Press the ◄ or ► button to select 

On

 or 

Off

.

If your receiver supports audio only, it may not appear in the device list.

N

The receiver will work when you have properly connected the Optical IN jack of the 

N

receiver to the Optical Out jack of the TV.

When the receiver (home theater) is set to On, you can hear sound output from the 

N

TV’s Optical jack. When the TV is displaying a DTV(air) signal, the TV will send out 5.1 

channel sound to the Home theater receiver. When the source is a digital component 

such as a DVD and is connected to the TV via HDMI, only 2 channel sound will be heard from the Home Theater receiver.

When using the Media Play feature, sound may not output properly through the receiver.

N

When listening through the receiver, there are restrictions for using the audio-related (MTS, Preferred language) menus.

N

If there is a power interruption to the TV when the 

N

Receiver

 is set to 

On

 (by disconnecting the power cord or a power failure), the 

Speaker Select

 may be set to 

External Speaker

 when you turn the TV on again. (see page 21)

Troubleshooting for Anynet

+

Symptom

Solution

Anynet+ does not work.

Check if the device is an 

•

Anynet

+

 device. The Anynet

+ 

system supports Anynet

+

 devices only.

Connect only one receiver (home theater).

•

Check if the 

•

Anynet

+

 device power cord is properly connected.

Check the 

•

Anynet

+

 device’s Video/Audio/HDMI 1.3 cable connections.

Check whether

•

 Anynet

+

 (HDMI-CEC)

 is set to 

On

 in the Anynet+ setup menu.

Check whether the TV remote control is in TV mode.

•

Check whether it is 

•

Anynet

+

 exclusive remote control.

Anynet+ doesn’t work in certain situations. (Searching channels, Plug & Play, etc.)

•

When connecting or removing the HDMI 1.3 cable, please make sure to search devices again 

•

or turn your TV off and on again.

Check if the 

•

Anynet

+

 Function of Anynet+ device is set on.

I want to start Anynet+.

Check if the Anynet

•

+

 device is properly connected to the TV and check if the 

Anynet

+

(HDMI-CEC)

 is set to 

On

 in the Anynet

+

 Setup menu.

Press the 

•

TV

 button on the TV remote control to switch to TV. Then press the 

TOOLS

 button 

to show the Anynet

+

 menu and select a menu you want.

I want to exit Anynet+.

Select 

•

View TV

 in the Anynet

+

 menu.

Press the 

•

SOURCE

 button on the TV remote control and select a device other than Anynet

+ 

devices. (Note that the channel button operates only when a tuner-embedded Anynet+ device 

is not connected.)

The message Connecting to 

Anynet+ device...  

appears on the screen.

You cannot use the remote control when you are configuring Anynet+ or switching to a view 

•

mode.

Use the remote control when the Anynet+ setting or switching to view mode is complete.

•

The Anynet+ device does not 

play.

You cannot use the play function when 

•

Plug & Play

 is in progress.

The connected device is not 

displayed.

Check whether or not the device supports 

•

Anynet

+

 functions.

Check whether or not the HDMI 1.3 cable is properly connected.

•

Check whether 

•

Anynet

+

 (HDMI-CEC)

 is set to 

On

 in the Anynet

+

 setup menu.

Search 

•

Anynet

+

 devices again.

You can connect an 

•

Anynet

+

 device using the HDMI 1.3 cable only. Some HDMI cables may 

not support Anynet

+

 functions.

If it is terminated by an abnormal situation such as disconnecting the HDMI cable or power 

•

cord or a power failure, please repeat the device scan.

The TV programme cannot be 

recorded.

Check whether the antenna jack on the recording device is properly connected.

•

The TV sound is not output 

through the receiver.

Connect the optical cable between TV and the receiver.

•

U

Move         

E

 Enter         

R

Return

View TV

Device List

Recording 

: DVDR

DVDR MENU
DVDR INFO

Receiver  

: On

Setup

BN68-02333F-Eng.indb   54

2009-08-26   �� 4:00:47