Media and tray
_ 30
Letterhead/ Preprinted paper
•
Letterhead/ Preprinted paper must be printed with heat-resistant ink that will not melt, vaporize, or release hazardous
emissions when subjected to the machine’s fusing temperature for 0.1 second. Check your machine’s specification to
view the fusing temperature (about 170°C (338 °F)).
•
Letterhead/ Preprinted paper ink must be non-flammable and should not adversely affect machine rollers.
•
Forms and letterhead should be sealed in a moisture-proof wrapping to prevent changes during storage.
•
Before you load letterhead/preprinted paper, verify that the ink on the paper is dry. During the fusing process, wet ink
can come off preprinted paper, reducing print quality.
Setting the paper size and type
After loading paper in the paper tray, set the paper size and type using the control panel. These settings will apply to copy
and fax modes.
Setting the paper size
1.
Press
Menu
until
Paper Setting
appears.
2.
Press the left/right arrow until
Paper Size
appears and press
OK
.
3.
Press
OK
.
4.
Press the left/right arrow to select the paper size you want.
5.
Press
OK
to save the selection.
6.
Press
Stop/Clear
to return to ready mode.
Setting the paper type
1.
Press
Menu
until
Paper Setting
appears.
2.
Press the left/right arrow until
Paper Type
appears and press
OK
.
3.
Press the left/right arrow to select the paper type you want.
4.
Press
OK
to save the selection.
5.
Press
Stop/Clear
to return to ready mode.
Using the output support
The surface of the output tray may become hot if you print a large number of pages at once. Make sure that you do
not touch the surface, and do not allow children near it.
The printed pages stack on the output support, and the output support will help the printed pages to align. The printer
sends output to the output tray by default. To use the output tray, make sure that the rear cover is closed.
If you are using A5 paper, fold the output tray. Otherwise, printed pages might be mis-alligned or jammed.
SINGLE-SIDED
DOUBLE-SIDED
Tray1
Face down
Face up
