English - 5

Setting up Anynet+

Press the 

TooLS

 button to display the 

Tools

 menu. You can also display Anynet+ menu by 

selecting 

Tools → Anynet

+ 

(HDMI-CEC)

.

Setup

Anynet+ 

(HDMI-CEC) → Off / On

To use the Anynet+ Function, 

Anynet

+ 

(HDMI-CEC)

 must be set to 

on

.

When the 

Anynet

+ 

(HDMI-CEC)

 function is disabled, all the Anynet+ related operations are 

deactivated.

Auto Turn Off → No / Yes

Setting an Anynet+ Device to turn Off automatically when the TV is turned Off.

The active source on the TV remote must be set to TV to use the Anynet+ function.
If you set 

Auto Turn off

 to 

Yes

, connected external devices are also turned off when the 

TV is turned off. If an external device is still recording, it may or may not turn off.

Switching between Anynet+ Devices

1. 

Press the 

TooLS

 button. Press the 

ENTEr

E

 button to select 

Anynet

+

 (HDMI-CEC)

.

2. 

Press the ▲ or ▼ button to select 

Device List

, then press the 

ENTEr

E

 button.

Anynet+ devices connected to the TV are listed.
If you cannot find a device you want, press the red button to scan for devices. 

3. 

Press the ▲ or ▼ button to select a particular device and press the 

ENTEr

E

 button. It 

is switched to the selected device.

Only when you set 

Anynet

+

 (HDMI-CEC)

 to 

on

 in the 

Application

 menu, the 

Device List

 menu appears.

Switching to the selected devices may take up to 2 minutes. You cannot cancel the 

operation during the switching operation.
The time required to scan for devices is determined by the number of connected devices.
When the device scan is complete, the number of devices found are not displayed.
Although the TV automatically searches the device list when the TV is turned on via the power button, devices connected to 

the TV may not always be automatically displayed in the device list. Press the red button to search for the connected device.
If you have selected external input mode by pressing the 

SourCE

 button, you cannot use the Anynet+ function. Make sure to 

switch to an Anynet+ device by using the 

Device List

.

Anynet+ Menu

The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV.

Anynet+ Menu

Description

View TV

Anynet+ mode changes to TV broadcast mode.

Device List

Shows the Anynet+ device list.

(device_name) 

MENu

Shows the connected device menus. E.g. If a DVD recorder is connected, the disc 

menu of the DVD recorder will appear.

(device_name) 

INFo

Shows the play menu of the connected device. E.g. If a DVD recorder is connected, 

the play menu of the DVD recorder will appear.

recording:

 (*recorder)

Starts recording immediately using the recorder. (This is only available for devices that 

support the recording function.)

Stop recording

: (*recorder)

Stops recording.

receiver

Sound is played through the receiver.

If more than one recording device is connected, they are displayed as (*recorder) and if only one recording device is 

connected, it will be represented as (*device_name).

¦

T

❑

■

N

■

N
N

¦

N
N

N

N

N
N
N

N

N

U

 Move       

E

 Enter       

R

 Return

Anynet+ (HDMI-CEC) 

: On                                  ▶

Setup

Auto Turn Off 

: Yes

Media Play (USB & DLNA)

Anynet+ (HDMI-CEC) 

Content Library
Home Network Centre

Application

U

 Move       

E

 Enter       

R

 Return

Anynet+ (HDMI-CEC) 

: On

Setup

Auto Turn Off 

: Yes                               ▶

U

 Move       

E

 Enter       

R

 Return

View TV
Device List
Recording: DVDR
DVDR MENU
DVDR INFO
Receiver: Off
Setup

BN68-02330G-00Eng.indb   58

2009-6-10   18:35:05