English - 5

TV remote Control Buttons Available in Anynet+ Mode

Device Type

operating Status

Available Buttons

Anynet+ Device

After switching to the device, when the 

menu of the corresponding device is 

displayed on the screen.

Numeric buttons

▲/▼/◄/►/ 

ENTEr

E

 buttons

Colour buttons / 

EXIT

 button

After switching to the device, while playing 

a file

π

(Backward search) / 

μ

(Forward search) / 

∫

(Stop) / 

∂

(Play) / 

∑

(Pause)

Device with built-in 

Tuner

After switching to the device, when you 

are watching a TV programme

P

>

 / 

P

<

 button

Audio Device

When Receiver is activated

Y

 / 

MuTE

 button

The Anynet+ function only works when the active source on the TV remote control is set to TV.
The 

∏

 button works only while in the recordable state.

You cannot control Anynet+ devices using the buttons on the TV. You can control Anynet+ devices only using the TV remote 

control.
The TV remote control may not work under certain conditions. If this occurs, reselect the Anynet+ device.
The Anynet+ functions do not operate with other manufacturers’ products.
The 

π

, 

μ

 operations may differ depending on the device.

recording

You can make a recording of a TV programme using a Samsung recorder.

1. 

Press the 

TooLS

 button. Press the 

ENTEr

E

 button to select 

Anynet

+

 (HDMI-CEC)

.

2. 

Press the ▲ or ▼ button to select Recording Immediately and press the 

ENTEr

E

button. Recording begins.

When there is more than one recording device
When multiple recording devices are connected, the recording devices are listed. 

Press the ▲ or ▼ button to select a recording device and press the 

ENTEr

E

button. Recording begins.
When the recording device is not displayed select 

Device List

 and press the Red 

button to search devices

3. 

Press the 

EXIT

 button to exit.

You can record the source streams by selecting 

recording:

 (device_name).

Pressing the 

∏

 button will record whatever you are currently watching. If you are watching video from another device, 

the video from the device is recorded.
Before recording, check whether the antenna jack is properly connected to the recording device. To properly connect an 

antenna to a recording device, refer to the recording device’s users manual.

Listening through a receiver (Home Theatre)

You can listen to sound through a receiver instead of the TV speaker.

1. 

Press the 

TooLS

 button. Press the 

ENTEr

E

 button to select 

Anynet

+

 (HDMI-CEC)

.

2. 

Press the ▲ or ▼ button to select 

receiver

. Press the ◄ or ► button to select 

on

 or 

off

.

3. 

Press the 

EXIT

 button to exit.

If your receiver supports audio only, it may not appear in the device list.
The receiver will work when you have properly connected the optical in jack of the 

receiver to the 

DIgITAL AuDIo ouT (oPTICAL)

 jack of the TV.

When the receiver (home theatre) is set to On, you can hear sound output from 

the TV’s Optical jack. When the TV is displaying a DTV(air) signal, the TV will send 

out 5.1 channel sound to the Home Theatre receiver. When the source is a digital component such as a DVD and is 

connected to the TV via HDMI, only 2 channel sound will be heard from the Home Theatre receiver.
If there is a power interruption to the TV when the 

receiver

 is set to 

on

 (by disconnecting the power cord or a power 

failure), the 

Speaker Select

 may be set to 

External Speaker

 when you turn the TV on again.

N
N
N

N
N
N

¦

N

N

N
N

N

¦

N
N

N

N

U

 Move       

E

 Enter       

R

 Return

View TV
Device List
Recording: DVDR
DVDR MENU
DVDR INFO
Receiver: Off
Setup

U

 Move       

E

 Enter       

R

 Return

View TV
Device List
Recording: DVDR
DVDR MENU
DVDR INFO
Receiver: Off
Setup

BN68-02330G-00Eng.indb   59

2009-6-10   18:35:05