30

English

Advanced Features

¦

Connecting to a Wireless Network

To connect your TV to your network wirelessly, you need a wireless router or modem and a Samsung Wireless LAN Adapter 
(WIS09ABGN, WIS09ABGN2, WIS10ABGN), which you connect to your TV’s back or side panel USB jack. See the illustration below.

Samsung’s Wireless LAN adapter is sold separately and is offered by select retailers, Ecommerce sites and Samsungparts.
com. Samsung’s Wireless LAN adapter supports the IEEE 802.11A/B/G and N communication protocols. Samsung 
recommends using IEEE 802.11N. When you play the video over a IEEE 802.11B/G connection, the video may not play 
smoothly.

✎

NOTE

x

You must use the “Samsung Wireless LAN Adapter” (WIS09ABGN, WIS09ABGN2, WIS10ABGN) to use a wireless 
network. 

x

Samsung’s Wireless LAN Adapter is sold separately. The Samsung Wireless LAN Adapter is offered by select 
retailers, Ecommerce sites and Samsungparts.com. 

x

To use a wireless network, your TV must be connected to a wireless IP sharer. If the wireless IP sharer supports 
DHCP, your TV can use a DHCP or static IP address to connect to the wireless network. 

x

Select a channel for the wireless IP sharer that is not currently being used. If the channel set for the wireless IP sharer 
is currently being used by another device nearby, this will result in interference and communication failure. 

x

If you apply a security system other than the systems listed blow, it will not work with the TV. 

x

If Pure High-throughput (Greenfield) 802.11N mode is selected and the Encryption type is set to WEP, TKIP or TKIP-
AES (WPS2Mixed) for your AP, Samsung TVs will not support a connection in compliance with new Wi-Fi certification 
specifications. 

x

If your AP supports WPS (Wi-Fi Protected Setup), you can connect to the network via PBC (Push Button 
Configuration) or PIN (Personal Identification Number). WPS will automatically configure the SSID and WPA key in 
either mode.

x

If your router, modem, or device isn’t certified, it may not connect to the TV via the “Samsung Wireless LAN Adapter.”

x

Connection Methods

: You can setup the wireless network connection six ways. 

– Samsung Auto Configuration

–

PBC (WPS)

– Auto Setup (Using the Auto Network Search function)

– Manual Setup

–

SWL(Samsung Wireless Link)

–

Ad-Hoc

x

The Samsung Wireless LAN Adapter may not be recognized or work properly when connecting via a USB hub or via 
a USB extension cable other than the one available from Samsung.

TV Rear Panel

The LAN Port on 
the Wall

LAN Cable

Wireless IP sharer

(AP having DHCP server)

Samsung Wireless
LAN Adapter

✎

To use the 

SWL(Samsung Wireless Link)

 function, connect to the 

USB 1 (HDD)

 port.

or

[UC8000_RU]BN68-02697R-02L04.indb   30

2010-08-24   오전 11:08:30