34

English

Advanced Features

SWL(Samsung Wireless Link)

This function lets you connect a Samsung device that 
supports the PBC (WPS) to your TV. You can connect 
devices to the TV even if a sharer is not connected to the TV.

✎

To use the Internet@TV, the AP (access point) must be 
connected to the wireless network.

✎

If a Samsung Wireless LAN Adapter is connected to the 

USB 2

 port, the network may not operate normally. We 

recommend to connecting it to the 

USB 1 (HDD)

 port.

✎

Only sharers using the 2.4 Ghz band are supported. 
Sharers using the 5 Ghz band are not supported.

SWL connect

You can directly connect a device that supports the PBC 
(WPS) to the TV.

✎

This function is available when 

SWL(Samsung 

Wireless Link)

 is set to 

On

.

How to connect Samsung Wireless Link

For the procedures to establish a connection, refer to the 
following:

1. 

Follow Steps 1 through 5 in the “How to set up using 
PBC (WPS)” (p. 31).

2. 

Select 

SWL(Samsung Wireless Link)

 by using the 

▼

button and press the 

ENTER

E

 button to turn it On.

3. 

Select 

SWL connect

 by using the 

▼

 button and press 

the 

ENTER

E

 button.

4. 

If the “

Press the PBC button on the PBC(WPS) 

supported device to connect within 120 seconds.

” 

message appears, press the PBC button on the device 
to connect.

✎

For more information, refer to the wireless network 
setup manual of the device to be connected. 

5. 

If the device is connected properly to the TV after 
starting count on message box then message box will 
be disappeared automatically.

✎

If the connection fails, please retry after 2 minutes.

If Your TV Fails to Connect to the Internet

Your TV may not be able to connect to the Internet 
because your ISP has permanently registered the 
MAC address (a unique identifying number) of your 
PC or modem, which it then authenticates each time 
you connect to the Internet as a way of preventing 
unauthorized access. As your TV has a different MAC 
address, your ISP can not authenticate its MAC address, 
and your TV can not connect.
To resolve this problem, ask your ISP about the 
procedures required to connect devices other than a PC 
(such as your TV) to the Internet.
If your Internet service provider requires an ID or password 
to connect to the Internet, your TV may not be able to 
connect to the Internet. If this is the case, you must enter 
your ID or password when connecting to the Internet.
The internet connection may fail because of a firewall 
problem. If this is the case, contact your Internet service 
provider. 
If you cannot connect to the Internet even after you have 
followed the procedures of your Internet service provider, 
please contact Samsung Electronics at 1-800-SAMSUNG.

[UC8000_RU]BN68-02697R-02L04.indb   34

2010-08-24   오전 11:08:32