E-6

Bluetooth

 one touch connection via NFC

About NFC technology

■

Near Field Communication (NFC) is a set of standards for 
devices (smartphones/tablets) to establish radio communi-
cation with each other by touching/tapping them together 
or bringing them into close proximity.
Using NFC in this product simplifi es the pairing method of 

Bluetooth

 connectivity.

This audio system supports NFC-enabled device with 
Android 4.1, Jelly Bean and higher.
For device with a lower Android version, refer the 
operation manual of the device for recommended app 
(application).

●

●

Unlike other wireless technology, NFC requires no 
discovery or pairing.
Simply tap the source device to the NFC tag to instantly 
enjoy seamless connectivity between your smart device 
and the audio system.

NFC detection area

■

NFC detection area location may vary depending on the 
device (smartphone/tablet). Refer operation manual of the 
device for detail.

NFC tag

(during 

Bluetooth

 Standby mode)

Manu

al 

B

lu

e

t

ooth

 setti

n

g

Switch ‘ON’ 

Bluetooth

Search/scan

A 

Bluetooth

 audio 

source device 
(smartphone/tablet).

Pairing

Connect

NFC tag set up

■

The NFC tags can be placed anywhere convenient to you. The velcro 
tapes supplied will help to secure the tags onto the desired location.

Caution:

Make sure that the NFC tag is placed on a fl at and level surface.

If you choose not to use the velcro tape, do not place 
the NFC tag near metal surface to avoid connection 
interference during tagging.

Important:

NFC tag has unique ID for each individual set, SHARP 
provides 2 identical tags for your convenience.
SHARP will not be held liable for the damages caused by 
rewriting the tags.

Keep all small parts away from children as they may 
be accidentally swallowed.

Peel the separator off the velcro tape (loop type) 
and stick it on a desired surface.

Separator

 Velcro tape

(loop type)

Peel the separator off the velcro tape (hook type) 
and stick it to the rear of the NFC tag. Then place 
the tag onto the desired location.

Separator

Rear view of the NFC tag

Velcro tape
(hook type)

●
●

●

●

1

2

NFC connection for audio playback

■

Check that:

Your device (smartphone/tablet) has an NFC function.
NFC function on your device is enabled.
Screen lock function of the device is off.
This unit is not in Eco mode.
Your device must be within 10 metres from the unit.

Touch your device to the supplied NFC tag.

NFC tag

A pop-up window asking whether to proceed with 
the 

Bluetooth

 connection appears on the device. 

Select <YES>.

The ‘connected’ message appears when the connec-
tion is complete.

Playback will start automatically, otherwise press 
play (on remote control or source device).

Sound will be heard from the speakers of this unit via 
audio streaming.
Your device must be within 10 metres from the unit.

Various 

Bluetooth

 operation buttons (remote control only)

Press the button to play or pause.

Press the button to skip up.

Press and hold to fast forward.
Press the button to skip down.

Press and hold to fast reverse.

Notes:

To listen to audio via Bluetooth connectivity without 
NFC tag - refer “

Pairing with other Bluetooth source 

devices

” on page 7.

To disconnect, simply touch your device to the tag 
again.

●

●

●

●

●

1

2

●

3

●

●

●

●

GX-BT7_OM_EN.indd   6

GX-BT7_OM_EN.indd   6

2013-08-02   11:24:47

2013-08-02   11:24:47