E-7

Listening to 

Bluetooth 

enabled devices

Bluetooth

■

Bluetooth wireless technology is a short-range radio 
technology that enables wireless communication between 
various types of digital devices, such as mobile phone or 
computer. It operates within a range of about 10 metres (30 
feet) without the hassle of having to use cables to connect 
these devices.

This unit supports the following:

Communication System: Bluetooth Specifi cation  version 
2.1 Bluetooth + Enhanced Data Rate (EDR).
Support Profi le : A2DP (Advanced Audio Distribution Profi le) 
and AVRCP (Audio/Video Remote Control Profi le)

Notes when using unit with a mobile phone

This unit cannot be used to talk over the telephone 
even when there is a 

Bluetooth

 connection made to a 

mobile phone.
Please refer to the operating manual supplied with the 
mobile phone for details on operation of your mobile 
phone while transmitting the sound using a 

Bluetooth

connection.

MUTE

ON/

STAND-BY

TREBLE

AUDIO IN

BASS

PAIRING

VOL

E

 SOUND

USB

BLUETOOTH

DIMMER

RRMCGA342AWSA

ECO MODE

PAIRING

BLUETOOTH

Pairing 

Bluetooth

 devices

■

Bluetooth

 devices need to be initially paired fi rst  before 

they can exchange data. Once paired, it is not necessary 
to pair them again unless:

pairing is made with more than 8 devices.
Pairing can only be made one device at a time. This 
unit can be paired to a maximum of 8 devices. If sub-
sequent device is paired, the oldest device paired, will 
be deleted and replaced with the new one.
this unit is reset. All pairing information is deleted when 
unit is reset.
pairing information is deleted while re-pairing, etc.

Indicators:

Status

PAIRING indicator (blue)

Unconnected

Blinks

Pairing mode

Blinks quickly

Connected

Lights up

However, the indicator status is not displayed during 

Bluetooth

 stand-by mode.

●

●

●

●

●

Pairing with other 

Bluetooth

 source devices

■

Press the ON/STAND-BY button to turn the power 
on.

1

Press the 

BLUETOOTH

 button on the remote control 

or FUNCTION button repeatedly on the main unit to 
select 

Bluetooth

 function. (Pairing indicator blinks.)

2

Press and hold the PAIRING button for 3 seconds or 
more.

PAIRING indicator blinks quickly. The unit is now in 
pairing mode and is ready to be paired with other 

Bluetooth

 source device.

3

Perform pairing procedure on the source device to 
detect this unit. “SHARP GX-BT7” will appear in the 
detected devices list (if available) in the source de-
vice. (Refer the source device operating manual for 
details).

Notes:

Place the devices to be paired within 1 metre (3 
feet) of each other when pairing.
Some source devices are unable to display lists of 
detected devices. To pair this unit with the source 
device, refer to the source device operating manual 
for details.

4

●

●

Select “SHARP GX-BT7” from the source list. If Pass-
code* is required, enter “0000”.
* Passcode may be called PIN Code, Passkey, PIN 
number or Password.

5

Pairing indicator (blue) will stop blinking once the unit 
is successfully paired with the source device. (Pairing 
information is now memorised in the unit.)
Some audio source devices may connect with the unit 
automatically after pairing is completed, otherwise 
follow the instructions in the source device operating 
manual to start connection.

6

Press the play button on remote control or source de-
vice to start 

Bluetooth 

streaming playback.

7

Notes:

If a device such as microwave oven, wireless LAN card, 

Bluetooth

 device or any other device that uses the same 

2.4 GHz frequency near the system some sound interrup-
tion may be heard.
The transmission distance of the wireless signal between 
the device and the main unit is about 10 m (30 feet), but 
may vary depending on your operating environment. If a 
steel concrete or metallic wall is between the device and 
the main unit, the system may not operate at all, because 
the wireless signal cannot penetrate metal. 
If this unit or the source device is turned off before 

Blue-

tooth

 connection is completed, pairing will not be com-

pleted and the pairing information will not be memorised. 
Repeat step 1 onwards to start pairing again.
To pair with other devices, repeat steps 1 - 5 for each de-
vice. This unit can be paired to a maximum of 8 devices. 
If subsequent device is paired, the oldest device paired, 
will be deleted and replaced with the new one.
Once a device is ousted or deleted from the pairing list, 
the pairing information for the device is also deleted. To 
listen to the sound from the device again, it needs to be 
re-paired. Perform steps 1 - 5 to pair the device again.

●

●

●

●

●

GX-BT7_OM_EN.indd   7

GX-BT7_OM_EN.indd   7

2013-08-02   08:29:31

2013-08-02   08:29:31