![background image](/i/sharp/151925/sharp-gx-bt7/h/sharp-gx-bt7-017.png)
E-8
Listening to
Bluetooth
enabled devices (continued)
Listening to the sound
■
Check that:
The source device
Bluetooth
functionality is ON.
Pairing of this unit and the source device is completed.
Unit is in connected mode (pairing indicator (BLUE) lights
up.)
Press the ON/STAND-BY button to turn the power on.
1
Press the
BLUETOOTH
button on the remote control or
FUNCTION button repeatedly on the main unit to select
Bluetooth
function.
2
Start the
Bluetooth
connection from the
Bluetooth
stereo audio source device.
3
Playback will start automatically, otherwise press play
(on remote control or source device).
Notes:
For various
Bluetooth
operations, refer “NFC con-
nection for audio playback” on page 6.
If the source device has an extra bass function or
equalizer function, set them to off. If these functions
are on, sound may be distorted.
4
●
●
Notes:
Make the
Bluetooth
connection again if the source device
is not turned on, or its
Bluetooth
functionality is off or is in
sleep mode.
●
●
●
●
To disconnect the
Bluetooth
device
■
Perform any of the followings.
- Disconnect the
Bluetooth
connection on the audio source
device.
Refer the operating manual supplied with the device.
- Turn off the
Bluetooth
stereo audio source device.
- Turn off this unit.
Note:
The volume of this unit may not be controlled as intended
depending on the device.
Auto power on
■
During
Bluetooth
stand-by mode, when music is played from
your device, the unit will automatically power on when the
Bluetooth
connection has been set up between the main unit
and your device and they remain connected.
Note:
This function is not applicable during Eco mode.
GX-BT7_OM_EN.indd 8
GX-BT7_OM_EN.indd 8
2013-08-02 11:24:47
2013-08-02 11:24:47