53

Radio reception

The stations cannot be received.
The sound is hampered by noises.

• Connect a power aerial control lead (blue) or

accessory power supply lead (red) to the
power supply lead of a car’s aerial booster
(only when your car has built-in FM/AM
aerial in the rear/side glass).

• Check the connection of the car aerial.
• The auto aerial will not go up.

Check the connection of the power aerial
control lead.

• Check the frequency.

Preset tuning is not possible.

• Store the correct frequency in the memory.
• The broadcast signal is too weak.

Automatic tuning is not possible.

• The local seek mode is set to “Local”.

,

Set “Local” to “DX” (page 43).

• The broadcast signal is too weak.

,

Perform manual tuning.

During FM reception, the “ST”
indication flashes.

• Tune in the frequency accurately.
• The broadcast signal is too weak.

,

Set “Stereo/MONO” to “MONO” (page
43).

An FM programme broadcast in
stereo is heard in monaural.

The unit is in monaural reception mode.

,

Set “Stereo/MONO” to “Stereo” (page
43).

Messages

Error displays/Messages

The following indications appear when a
malfunction occurs on the unit.

On the monitor

DISC Error

• The disc is dirty or inserted upside down.

Clean or insert the disc correctly.

• The disc cannot play because of some

problem.
Insert another disc.

Can not play

• The DVD is prohibited for playback due to

the different region code.

• The disc is not compatible with this unit.

On the display window

ERR-1

• The disc is dirty or inserted upside down.

Clean or insert the disc correctly.

• The disc cannot play because of some

problem.
Insert another disc.

ERR-2

• The DVD is prohibited for playback due to

the different region code.

• The disc is not compatible with this unit.