![background image](/i/tripp-lite/128520/tripp-lite-b094-008-2e-m-f-b096-048-b096-016-b094-008-2e-v-b096-032/h/tripp-lite-b094-008-2e-m-f-b096-048-b096-016-b094-008-2e-v-b096-032-174.png)
174
Chapter 11: System Management
11.2 Upgrade Firmware
Before upgrading you should ascertain if you are already running the most current firmware in your gateway. Your Console
Server will not allow you to upgrade to the same or an earlier version.
• The
Firmware
version is displayed in the header of each page
• Or select
Status: Support Report
and note the
Firmware Version
• To upgrade, you must first download the latest firmware image from
http://www.tripplite.com/EN/support/downloads/driver-firmware-downloads.cfm
• Save this downloaded firmware image file on to a system on the same subnet as the Console Server
• Also download and read the
release_notes.txt
for the latest information
• To then upload the firmware image file to your Console Server, select
System: Firmware
• Specify the address and name of the downloaded Firmware Upgrade File, or
Browse
the local subnet and locate the
downloaded file
• Click
Apply
and the Console Server appliance will undertake a soft reboot and commence upgrading the firmware. This
process will take several minutes
• After the firmware upgrade has completed, click
here
to return to the Management Console. Your Console Server will have
retained all its pre-upgrade configuration information