To select key functions.
 To set measured DC voltage to initially set value. 
 Initially set automatic range can be set to 

relavite

 range by pressing REL

 key.

 To connect load.

V

V

ºÚ

ºÚ

ºì

ºì

~~

~~

Figure 4

To disconnect probe and measured circuit then 
remove probe from input end after all 
measurement operations.

3. Resistance measurement (

) (shown in 

    Figure 5)

    Warning: Be sure to cut off circuit power and 
    discharge residual charge of all capacitors 
    before load connection.

    To set knob.
    Please place function knob to                     
    measurement 

    gear.

    To select key functions.
    To set measured DC voltage to initially set value. 
    Initially set automatic range  can be set to 

relative

    range by pressing REL

 key.

    To connect load.

ºì

ºì

ºÚ

ºÚ

Figure 5

To gain excellent measured result by separating 
element from circuit.
To disconnect probe and measured circuit then 
remove probe from input end after all 
measurement operations.

4. Diode measurement (       ) (shown in Figure 6)

    Warning: Be sure to cut off circuit power and 
    discharge residual charge of all capacitors 
    before load connection.

    To set knob.
    Please place function knob to 

    measurement gear.
    To select functions.
    To select diode detection by pressing SELECT 
    key;
    To connect load.