28
AFTER OPERATION
1
Switch off the appliance by sliding the switch
(1)
to the
“off” position. The control lamp
(2)
will stop illuminating.
2
Unplug the appliance.
3
Place the appliance on a heat-resistant surface and allow
to cool before cleaning and storing.
Cleaning and maintenance
1
Unplug the appliance and allow to cool completely.
2
Clean the plates after each use to avoid the accumulation
of residue.
3
Wipe all surfaces with a soft, damp cloth. If necessary,
use gentle dishwashing liquid. Wash off the dishwashing
liquid.
4
If residue has accumulated, use a medium or soft brush
to remove it (an old toothbrush is best for this purpose). Next,
wipe the appliance with a soft, damp cloth.
5
Do not immerse the hair straightener into any liquid.
6
Do not use abrasive or corrosive agents or solvents.
Ecology – Taking care of the environment!
Each user can contribute to protect the environment.
It is neither difficult nor expensive. In order to do so:
Return cardboard packages to recycling
points. Throw polyethylene (PE) bags to
appropriate containers. Return a worn out
appliance to an appropriate collecting point
as the components of the appliance may
pose a threat to the environment.
Do not dispose of with household waste!!!
The manufacturer/importer does not accept any liability for any
damages resulting from unintended use or improper handling.
The manufacturer/importer reserves his rights to modify the product
any time in order to adjust it to law regulations, norms, directives,
or due to construction, trade, aesthetic or other reasons, without
notifying in advance.
GW33-024
