Chapter 2 Hardware Installation and Connections
IES-5000 Series User’s Guide
35
2.3.4 Removing a Splitter Chassis Card
Use the following procedure to remove a splitter card from the splitter chassis.
1
Disconnect the cable from the card.
2
Loosen the two thumbscrews.
3
Grasp the handles on the front panel of the card and start to pull the card out.
4
After you have the card partially out of the chassis, place one hand under the card to
support it.
5
Slide the card out of the slot.
Figure 15
Loosening Splitter Chassis Card Thumbscrews
