Chapter 2 Hardware Installation and Connections
IES-5000 Series User’s Guide
46
Figure 24
Telco-50 Cable with RJ-11 Connectors
2.5.4 MDF Connections
The following section gives an overview of possible installation scenarios for the IES-5000
using the line cards and splitter cards. Data and voice signals can coexist on the same
telephone wiring.
Figure 25
Installation Overview Example
You can also attach RJ-11 connectors to the Telco-50 cable and connect directly to a DSL
modem(s), a telephone(s) or a patch panel. This chapter discusses connections using MDFs.
The following sections describe typical installation scenarios.
