Appendix A System Specifications
IES-5000 Series User’s Guide
77
Power consumption
(Max)
IES-5000M:
1080 Watts
30 Amps
-36 to -72 Volts DC, no tolerance
IES-5005M:
540 Watts
15 Amps
-36 to -72 Volts DC, no tolerance
Use a power source with 1080 W minimum output for the IES-5000M or 540
W minimum output for the IES-5005M. There is no tolerance for the input
voltage.
Backplane
IES-5000M: The backplane has 8 1-Gigabit (SerDes) Ethernet ports.
IES-5005M: The backplane has 4 2-Gigabit (SerDes) Ethernet ports.
Telco-50 cable
specifications (optional)
General use:
Long: 71 cm
Short: 38 cm
180-degree cable (for VOP-1248G splitter rear panel):
60cm
72-port line card only:
Long: 110 cm
Medium: 93 cm
Short: 71 cm
Operating Environment
Temperature: -40°C ~ 65°C
Humidity: 5% - 95% (non-condensing)
Storage Environment
Temperature: -40°C ~ 70°C
Humidity: 5% - 95% (non-condensing)
Fan modules
Fan Mechanical Operation
•
Safe design: All fans have rotor-locking protection to prevent damage to
wiring and electrical components. The fan rotors will lock when fan
movement is physically obstructed.
•
Locked rotor protection: No damage will occur when the fan rotors are
locked for 72 continuous hours. After this amount of time, damage to the
fans may occur. The fans will automatically restart as soon as the
physical obstruction is removed.
•
Polarity protection: A reverse-polarity voltage connection will not cause
damage. After the polarity is corrected, the fan will restart automatically.
•
Insulation resistance: There should be more than 10M ohms of
resistance between the housing and the terminal at 500 V.D.C.
IES-5000 fan module:
Number of fans: 6
Fan dimensions: 92.0 mm (W) x 25.4 mm (D) x 92.0 mm (H)
Unit dimensions:
46.4 mm (W) x 237.0 mm (D) x 288.9 mm (H)
IES-5005 fan module:
Number of fans: 3 (1 large and 2 small)
Fan dimensions (large): 120 mm (W) x 25 mm (D) x 120 mm (H)
Fan dimensions (small): 60 mm (W) x 20 mm (D) x 60 mm (H)
Unit dimensions: 46.4 mm (W) x 255 mm (D) x 153 mm (H)
The fan module contains a removable filter screen for access to the fans
and to clean or replace the filter.
