BenQ DC 5530 User’s Manual
Preparing Your DC E40 for Use
8
Eng
lish
5.
To remove the SD card, make sure the camera is turned off, open the battery/SD card cover,
and press down lightly on the exposed edge of the card. The card will eject itself
.
2.5
Attaching the Hand Strap
Always use the hand strap to prevent accidentally dropping the camera. The hand strap is also a
good way to keep your stylus nearby.
1.
Thread the small loop of the hand strap through the strap eyelet at the top left corner of the
rear of the camera
.
2.
Pull the stylus and large loop through the small loop until the strap is firmly secured
.
Note
•
To prevent data from being accidentally erased
from the SD card, slide the write-protect tab to
the “LOCK” position.
•
The SD card must be unlocked in order to save,
edit, or erase data.
•
Format new SD cards using the camera’s format
function before use. See “Memory: Copying and Formatting” on page 41 to learn how to
format SD cards.
D
SD
D
LOC
K
Press the tab in the
direction of the arrow
on the card to write
protect the SD Memory
Card.
Write-protect tab
A
B
TV
out
TV
out
TV
out
TV
out
A
B
