24

Using Your Printer

www

.del

l.

com |

 su

ppo

rt.

d

e

ll.

co

m

Printing From Your Pictbridge-enabled or Other Compatible Camera

You can print photos from any PictBridge-enabled camera or other compatible device. Make sure 

the card slots are empty before you plug in the camera cable. 

1

Plug the USB cable from the camera into the camera port connector 

 on the side of 

the printer.

If a photo is printing when you plug the camera cable in, the camera is detected when 

printing is completed.

2

If your camera is PictBridge enabled, then use your camera display to review photos, choose 

printing options, and print. (If your camera is not PictBridge enabled, then use your printer 

LCD.)

Canceling Printing

To stop printing, press 

Cancel

 and follow the directions on the LCD.

Printing is canceled upon completion of the current printing pass. The unfinished print is ejected 

into the paper tray.

Removing Perforated Tabs From Prints

NOTE: 

Remove perforated tabs from prints only after printing. Photo paper missing perforated tabs will 

not feed properly.

1

Fold the tabs up, then down.

2

Remove and discard each tab.