26

Using Your Printer

www

.del

l.

com |

 su

ppo

rt.

d

e

ll.

co

m

Installing Printer Drivers and Software

1

Make sure the power cable is connected to the printer and the printer is on.

2

Insert the 

Drivers and Utilities

 CD into your computer.

3

Plug the USB cable (sold separately) into the USB connector 

 on your computer.

4

Plug the other end of the USB cable into the square USB connector 

 on the printer.

5

Follow the on-screen instructions to install the printer drivers and printer documentation. 

Select 

Typical

 to install all components. Select 

Custom

 to install specific components.

6

Insert the remaining two CDs, one at a time, to install your photo editing software programs. 

Follow the on-screen instructions on the printer.

Printing From a Computer

To Print

1

Turn on your computer and printer, and make sure they are connected with a USB cable.

2

Using your preferred application, open the photos you want to print.

3

Access printer settings by selecting 

Print

 or 

Page Setup

 from the 

File

 menu (depending on 

your application and operating system).

4

Make sure the printer is selected as the current printer and that the paper size is set to 

4 x 6 in. (102 x 152 mm).

5

Change any other settings as needed, then click 

OK

 or 

Print

. (Depending on your application 

and operating system, you may first need to return to the main menu and select 

Print

 from 

the 

File

 menu.)

NOTE: 

Print selections made from the printer in standalone mode (use of printer without a computer) are 

not used when you send a print job from the computer.

USB connector 
to PC