![background image](/i/dell/153134/dell-b2375dnf/h/dell-b2375dnf-147.png)
- 146
-
3
Load the print material
with the side to be printed on facing up
.
Depending on the paper type you are using, keep the following loading method:
•
Envelopes: load them with the flap side down and with the stamp area on the top
left side.
•
Transparencies: load them with the print side up and the top with the adhesive
strip entering the printer first.
•
Labels: load them with the print size up and the top short edge entering the
printer first.
•
Preprinted paper: load with the design face up, top edge toward the printer.
•
Card stock: load them with the print side up and the short edge entering the
printer first.
•
Pre printed paper: the printed side should be facing down with an uncurled edge
toward the printer.
4
Squeeze the width guide and adjust it to the width of the print material. Do not force
too much, or the paper will be bent, which will result in a paper jam or skew.