Инструкция для DELL B2375dnf

(скачивание инструкции бесплатно)

Формат файла: PDF

Доступность: Бесплатно как и все руководства на сайте. Без регистрации и SMS.

Дополнительно: Чтение инструкции онлайн

- 264

Junk Fax Setup

Using the Junk Fax Setup feature, the system will not accept faxes
sent from remote stations. Their numbers are stored in the
memory as junk fax numbers. This feature is useful for blocking
any unwanted faxes.

Select

Off

to turn the feature off. Anybody can send you a fax.

Select

to turn the feature on. You can set up to 10 fax numbers

as junk fax numbers. After storing the numbers, you do not receive
any faxes from the registered stations.

Secure Receive

You can keep your received faxes from being accessed by
unauthorized people.

For further details about setting this mode, see "Using the Secure
Receiving Mode (Administrator only)".

Prefix Dial

You can set a prefix dial number of up to five digits. This number
dials before any auto dial number is started. It is useful for
accessing the PABX exchange.

Stamp Received
Name

This option allows the printer to automatically print the page
number, and the date and time of the reception at the bottom of
each page of a received document.

Select

Off

to turn this feature off.

Select

to turn this feature on.

ECM Mode

The Error Correction Mode helps with poor line quality and
ensures that faxes are sent smoothly to any other ECM-equipped
fax machine. If the line quality is poor, it takes more time to send a
fax when you are using the ECM mode.

Select

Off

to turn this feature off.

Select

to turn this feature on.

Modem Speed

Select the maximum modem speed you want if the phone line fails
to sustain a higher modem speed. You can select 33.6, 28.8, 14.4,
12.0, 9.6, or 4.8 kbps.

Ring to Answer

Specifies the number of times the machine rings before answering
an incoming call.

Receive Mode

Selects the default fax receiving mode.

Redial Delay

Sets the time interval before automatic redialling.

Redial Attempt

Sets the number of redial attempts. If you enter 0, the machine will
not redial.

MSG Confirm

Sets the machine to print a report whether a fax transmission was
successfully completed or not.

Option

Description