Инструкция для DELL B2375dnf

(скачивание инструкции бесплатно)

Формат файла: PDF

Доступность: Бесплатно как и все руководства на сайте. Без регистрации и SMS.

Дополнительно: Чтение инструкции онлайн

- 344

The printer doesn’t
scan.

• Check if a document is loaded into the printer.

• Check if your machine is connected to the computer. Ensure

that if it is connected properly if I/O error is reported while
scanning.

• Check if MFP port is not busy. Since functional components of

MFP (printer and scanner) share the same I/O interface (MFP
port), the situation of simultaneous access of different
"consumer" application to the same MFP port is possible. To
avoid possible conflicts, only one of them at a time is allowed
to gain control over the device. The other "consumer" will
encounter "device busy" response. This can usually happen
while starting scan procedure, and appropriate message box
will be displayed.

To identify the source of the problem, you should open MFP
ports configuration and select the port assigned to your
scanner. MFP port's symbol /dev/mfp0 corresponds to LP:0
designation displayed in the scanners' options, /dev/mfp1
relates to LP:1 and so on. USB ports start at /dev/mfp4, so
scanner on USB:0 relates to /dev/mfp4 respectively and so
forth sequentially. In the Selected port pane you can see if the
port is occupied by some other application. If this is the case,
you should wait for completion of the current job or should
press Release port button, if you are sure that the present
port's owner is not functioning properly.

I can’t print when I
installed both Linux
Print Package (LPP)
and MFP driver on the
same machine
simultaneously.

• Since both Linux Printer Package and MFP driver make a

symbolic link to "lpr" printing command, which is commonly
used on Unix clones, it is not recommended to use both
package on the same machine.

Can’t scan via Gimp
Front-end.

• Check if Gimp Front-end has “Xsane:Device dialog.” on the

“Acquire” menu. If not, you should install Xsane plug-in for
Gimp on the your computer. You can find Xsane plug-in
package for Gimp on Linux distribution CD or Gimp home
page. For the detail information, refer to the Help for Linux
distribution CD or Gimp Front-end application.

If you wish to use other kind of scan application, refer to the
Help for application.

Condition

Suggested solutions